Case Study: Sears
The cold-weather solution
The project required both repair and replacement. The section of the roof that was ideal for V2T was 88,820 square feet. Since V2T does not require adhesives or fasteners, winter did not impair installation.
The entire project was a tear off and replacement over a light-weight concrete deck.The installation needed two layers of 2.0” ISO board loose laid with a 1/2” dens deck cover board loose laid over the concrete deck. Carlisle’s 60 mil TPO was rolled out and secured with V2T vents; no screws, no glue. In these weather conditions this would be difficult or impossible with conventional roofing. Saratoga was able to continue the tear-off and replacement with no difficulty. The installation was completed with V2T in less time even in less than favorable conditions.